Very consistent sound across the broad 80-degree conical coverage pattern of the speaker is delivered because of the true point-source nature of the co-axial design. Any speaker that has the tweeter horizontally or vertically offset from the mid-frequency driver produces very different response as one moves through its coverage area from the tweeter side to the woofer side. This is due to the different distances the sound has to travel to reach the ears. This issue is eliminated in the CCM112.
Sound heard to the left, right, above and below the speaker is very consistent. For the audience, this means better quality sound across the entire listening area. For the performer this means less peaky response and fewer problems with feedback relative to where the microphone is moved.
The CCM112 Monitor has a smoother, more intelligible response on stage due to its point-source design. This allows greater gain before feedback.
Extremely compact. In the CCM112, the extra area that the tweeter would ordinarily take up on the front of the loudspeaker is eliminated. Instead the tweeter exits through the middle of the woofer, making it possible to make the cabinet barely bigger than a 12″ woofer yet still incorporate a compression driver and horn, a 700W amplifier and an integrated digital signal processor in a single cabinet.
The processor provides a full complement of filters, protections, limiters and equalizers that ensure consistent, accurate and reliable operation.
The CCM112 has 4 angles in which it can be placed. One is for use as a floor monitor for a standing performer. The second is for use as a floor monitor for a seated performer. The third is a shallower angle that’s useful if the CCM112 is to be used as a drum monitor on top of a drum sub or if you just want to put it on a table and use it as a DJ monitor. Finally it has a flat placement side so it can be used as a straight-ahead front fill. On that same surface it includes a pole socket mount so it can be mounted to a tripod speaker stand or on a pole above a socket-equipped subwoofer for use as a main PA speaker.
• Co-Axial Point Source Monitor
• Smooth Off-Axis Response
• Superior Rejection Of Feedback
• Ultra Small Size And Light Weight
• Bi-Amped Self-Powered, Built-In DSP
• Four Deployment Angles Plus Pole-Mount
• 700W Class D Amplifier
• CNC Cut Custom Grills Available
In a word, it’s versatile. A very compact bi-amplified, self-powered multi-angle wedge/utility monitor, the YesMon CCM112 can also be mounted on a pole stand to be used as an extremely size-conscious main speaker or DJ monitor.
Featuring a 12″ woofer with a 2” voice coil and a 1″ exit compression driver, the high-frequency horn is concentric within the woofer, making it a true point-source cabinet. The woofer’s power handling is 250W RMS and 500W program. Amplification is provided by a 700W, 2-channel Powersoft module with integrated DSP. $1795.00 each. Free freight to commercial addresses.
|Cut Sheet||CCM112 Cut Sheet PDF Download|
|Loudspeaker Description||Single 12 in. co-axial, compact bi-amplified, self-powered multi-angle wedge/utility monitor|
|Frequency Response (+-3 dB)||60 - 18,000 Hz|
|Maximum Sustained Output||123dB SPL, 1m, 2pi, half-space|
|Short-term Peak Output||126 dB|
|Nominal Dispersion (°H x °V)||60 x 60 conical|
|Input Power Rating||LF, MF, HF 1400W, 700W, 160W|
|Nominal Cabinet Impedance||LF 4 ohms, MF 4 ohms, HF 8 ohms (8+8+8 optional)|
|Amplifier||700 Watt 2 Channel Class D Digital Amplifier|
|DSP||Integrated comprehensive DSP for HP, LP, EQ and limiting|
|Electrical Connectors||Neutrik Powercon in and through|
|Voltage Operating Range||95-250V Auto-switching power supply|
|Current Draw, Nominal||95-125V: 3.6A @ 1/8 power, 195V-250V: 2.2A @ 1/8 power|
|Signal Input Connector||XLR-F|
|Signal Output Connector||XLR-M pass-through only|
|Controls||Rotary Level Control with adjustment from Off to +12dB, Push-button Preset Select||
|Enclosure Type||Bi-amplified, co-axial, multi-angle, vented wedge|
LF: 1 x 12 in. dia (300 mm) neodymium motor woofer with 3 in. (76mm) copper winding voice coil. HF: 3 in. diaphragm compression driver on 1.4 in. throat concentrically mounted wave guide
|Cabinet Construction||16mm Baltic Birch plywood. Equipped with 1 handle and a threaded pole socket mount|
|Dimensions (HxWxD)||14.5 in. x 15 in. x 12 in.|
|Net Weight||30 lbs|
|Shipping Weight||36 lbs|
|Exterior Finish||Weatherproof bonded high-pressure polyurethane|
|Grill||CNC Waterjet cut 1/8 in. aluminum or Black perforated, powder-coated steel||
|Support Pole||26 in. length and 48 in. lengths available|
|Covers||Heavy-duty padded nylon transport covers for 1 to 2 cabinets|
Have questions about our products and technology? General discussions of audio science, club installations, live sound considerations, etc?
BASSBOSS designer and founder David Lee has been designing loudspeakers and nightclub systems for over 30 years, and is happy to share his insights.
You can shoot us an email, or check out the Forum for current discussions and to post your question there.
Want a custom system built for you? Just give us a shout at (855) 822-7770 for personalized assistance!
Most speaker orders will be delivered by freight companies and require a loading dock. Residential freight deliveries are available and require an appointment, which may take longer than deliveries to commercial addresses, and cannot have guaranteed delivery dates. Please contact us for more information.
Most speaker orders will be delivered by freight. We will contact you directly with any relevant information to your order and shipment and to assist with scheduling of residential delivery, if required.
We can ship to virtually any address in the world. Please note that there are restrictions on some products, and some products cannot be shipped to international destinations.
We ship via international freight carriers worldwide, and are happy to assist with cost quoting, booking, customs and import duties questions and scheduling of freight.
Please note, all international orders will require a photocopy of the credit card used and a photo ID before shipping. We will contact you directly to supply these items after your order has been placed.
Please contact us for more information.
Returns Policy - 30 Day Money Back Guarantee
We sincerely believe you will be thrilled with every BASSBOSS product. To assure that, we offer a 30-day money back guarantee. If you are not completely satisfied with your purchase, simply return it. We're happy to work with you to find the best solution for your needs. You may exchange your order for another model or the purchase price will be refunded in full. Return shipping costs are not included in this offer.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in most cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 3 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return or exchange an item, contact us for personalized service and an RMA, or call (512) 368-3268 for immediate assistance.
BASSBOSS Warranty - Sound Defense
Sound Defense is a fully-transferable, enhanced warranty program that adds coverage of all driver components, including subwoofer voice coils, for two years. With Sound Defense if a driver fails within the program term, it will be repaired or replaced without charge.
BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase. Customers can also extend the “Sound Defense” program beyond the initial term through an annual subscription. Shipping costs are not included.
STANDARD CABINET WARRANTY
BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of six years from the date of purchase against defects in materials and workmanship. This warranty does not cover items that are intended to wear and can be replaced if worn or damaged. Examples of items not covered by this warranty are cabinet feet, grills and the finish or coating applied to the cabinet.
Please check the Warranty page for further information.