New features on the updated SSP118-MKII Sub, available now.
We've updated the SSP118 with upgrades for both form and function.
New port design. By removing the grill from over the ports, we've improved the sound by reducing possible turbulence. This update also increases cooling capabilities by greater air flow through the ports.
Two integrated through-cut pocket handles on each side. Offering more grab points and opportunities to grip from different angles, so it's even easier to move the SSP118 Sub. The handles are also integrated with the new ports for improved bracing of the cabinet structure.
Providing massive output at and above 30Hz. Modern electronic, jazz, reggae, R&B, rap and hip-hop music emphasize bass and put tremendous demands on low frequency loudspeakers. The SSP118 delivers the energy and power of modern music and it is built to take the stress of doing so continuously, to the extremes, without fail.
Optimized for remarkably deep bass response. In a cabinet of manageable size, SSP118 Subwoofers are each loaded with a single 18" long-excursion, neodymium motor, low frequency driver. Each driver has a 4” voice coil and is rated for 1500W nominal power handling, 3000W program power handling.
Practically impossible to blow drivers. Thanks to the combination of extremely rugged, very high power handling, long excursion drivers, carefully optimized cabinet and port design and several effective but transparent protection systems. The protection systems prevent thermal overload of the voice coils and minimize long-term thermal compression while having virtually no effect on the transient response and peak output of the loudspeakers.
Extremely flat, delivering response that is +- 3.0dB from 30Hz to 100Hz. No equalization is required to achieve this response. Unlike designs that require equalization, the SSP118’s tone, response and sensitivity are native to the design. Systems that require processing to achieve their stated response are still subject to the physical excursion and thermal limits of their drivers. Boosting low frequency EQ to achieve extended low-frequency response results in excessive distortion or woofer damage at full power unless limiting is applied. The limiting necessary to prevent failure also prevents the realization of their claimed frequency response at full power. The SSP118 does not suffer from these limitations. It faithfully delivers the low bass where most others either roll off or die trying.
Finished in extremely durable black textured weatherproof polyurethane coating. A top-mounted pole socket in each SSP118 provides for mid-high loudspeakers to be mounted on a straight speaker pole above the subwoofer. The enclosures also feature four large rubber feet and corresponding recesses in their tops to facilitate interlocking the boxes when stacked. The woofers' cones are made from a waterproof fiber matrix which can withstand exposure to spills and rain and can be wiped clean with a damp cloth.
Engineered to work hard and continue to work where others fail. The BASSBOSS warranty provides 6 years of coverage against defects in materials and workmanship. The warranty covers failed drivers, including burned voice coils, for 2 years from the date of purchase. If a voice coil, or anything else, fails within the warranty period, replacement parts will be provided without charge. (See warranty documentation for complete details). With the peace of mind afforded by plentiful, clean, undistorted output and comprehensive protection systems, you can confidently push the SSP118 to levels and depths that would otherwise require more or bigger cabinets.
Available with a number of optional accessories. The SSP118 Custom Fit Wheel Cart allows for easy movement of one or two subs. Custom Made Protective Covers protect your subs and keep them looking new for years to come. The option to have the amplifier mounted in a rack chassis is also available, please contact us for details.
• Solid, Flat Response Down To 30 Hz
• Same Response as SSP218 Subs
• Compact Size, Big Sound, Easy To Transport
• Reliable, Protected, Self-Powered System
• Excellent Output-To-Size Ratio
• Quick And Easy Setup
• 2400W RMS Class D Amp
• Powerful, Loud, Deep Bass
The SSP118 is a high-powered self-amplified single 18-inch subwoofer designed to give you the low frequency output of an average double 18” in a single 18” box. The SSP118 features a single 18-inch subwoofer enclosure with a high-powered 2400 Watt Class-D amplifier. Each SSP118 Powered Subwoofer gives you low frequency output down to 30 Hz and sustained output at 130 dB.
For Mobile Professionals who provide superior sound quality, the SSP118 allows you to deliver premium service with less equipment and labor. With two SSP118 Subwoofers, you will have the output of one of the worlds finest double-18" subwoofers, just divided into two smaller, more manageable pieces. $2979.00 each. Free freight to commercial addresses.
|Cut Sheet||SSP118 Cut Sheet PDF Download|
|Manual||SSP118 Manual PDF Download|
|Loudspeaker Description||Single 18 in. powered Subwoofer|
|Frequency Response (+-3 dB)||30 - 100 Hz|
|Frequency Response (+-1.5 dB)||32 - 100 Hz|
|Maximum Sustained Output||130 dB SPL, 1 meter, half-space (ground plane)|
|Short-term Peak Output||136 dB|
|Nominal Dispersion (H° x V°)||360 x 360|
2400 Watt RMS Class D Amplifier
|Processing||Integrated comprehensive DSP provides high pass, low pass, time alignment and limiting|
|Electrical Connectors, Amplifier||Neutrik Powercon input (Blue) NAC3FCA|
|Electrical Connector, Mains||NEMA5-15 (Edison) or L530, upon request|
|Voltage Operating Range||90-132VAC, 55-65Hz|
|Current Draw, Nominal||565 W, 4.7A|
|Signal Input Connector||XLR-F|
|Signal Output Connector||XLR-M pass-through only||
|Enclosure Type||Direct radiating, vented enclosure, optimally tuned for low frequency response with high sensitivity and high power handling|
1 x 18 in. diameter (457 mm) woofer with 4 in. (100 mm) copper winding voice coil and 56 mm (2.2") peak to peak excursion. Waterproof fiber composite cone
|Cabinet Construction||18 mm Baltic Birch plywood. Equipped with 2 handles, 1 pole socket and interlocking rubber feet|
|Dimensions (HxWxD)||22.5 in. x 30 in. x 24 in. (23.25 in. high with feet)|
|Net Weight||125 lbs|
|Shipping Weight||140 lbs|
|Exterior Finish||Weatherproof bonded high-pressure polyurethane|
|Grill||Perforated, powder-coated steel|
|Suspension System||16 – 3/8-16 threaded flypoints||
|Flying Hardware||Side-pull anchors and/or shoulder eyebolts|
|Installation Version||Available without handles and pole sockets|
|Amplification for Installation||Complete power package including DSP in two space rack chassis|
|Transport Dollies||Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 or 2 cabinets|
|Covers||Heavy-duty padded nylon transport covers for 1 or 2 cabinets|
Have questions about our products and technology? General discussions of audio science, club installations, live sound considerations, etc?
BASSBOSS designer and founder David Lee has been designing loudspeakers and nightclub systems for over 30 years, and is happy to share his insights.
You can shoot us an email, or check out the Forum for current discussions and to post your question there.
Want a custom system built for you? Just give us a shout at (855) 822-7770 for personalized assistance!
Most speaker orders will be delivered by freight companies and require a loading dock. Residential freight deliveries are available and require an appointment, which may take longer than deliveries to commercial addresses, and cannot have guaranteed delivery dates. Please contact us for more information.
Most speaker orders will be delivered by freight. We will contact you directly with any relevant information to your order and shipment and to assist with scheduling of residential delivery, if required.
We can ship to virtually any address in the world. Please note that there are restrictions on some products, and some products cannot be shipped to international destinations.
We ship via international freight carriers worldwide, and are happy to assist with cost quoting, booking, customs and import duties questions and scheduling of freight.
Please note, all international orders will require a photocopy of the credit card used and a photo ID before shipping. We will contact you directly to supply these items after your order has been placed.
Please contact us for more information.
Returns Policy - 30 Day Money Back Guarantee
We sincerely believe you will be thrilled with every BASSBOSS product. To assure that, we offer a 30-day money back guarantee. If you are not completely satisfied with your purchase, simply return it. We're happy to work with you to find the best solution for your needs. You may exchange your order for another model or the purchase price will be refunded in full. Return shipping costs are not included in this offer.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in most cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 3 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return or exchange an item, contact us for personalized service and an RMA, or call (512) 368-3268 for immediate assistance.
BASSBOSS Warranty - Sound Defense
Sound Defense is a fully-transferable, enhanced warranty program that adds coverage of all driver components, including subwoofer voice coils, for two years. With Sound Defense if a driver fails within the program term, it will be repaired or replaced without charge.
BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase. Customers can also extend the “Sound Defense” program beyond the initial term through an annual subscription. Shipping costs are not included.
STANDARD CABINET WARRANTY
BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of six years from the date of purchase against defects in materials and workmanship. This warranty does not cover items that are intended to wear and can be replaced if worn or damaged. Examples of items not covered by this warranty are cabinet feet, grills and the finish or coating applied to the cabinet.
Please check the Warranty page for further information.