Loading... Please wait...

SSP215 Powered Subwoofer

Ships within Three Days
160.00 LBS
Free Shipping

    SSP215 Powered Subwoofer

    Providing massive output at and above 35Hz, reliably, consistently and with great fidelity. Modern electronic, jazz, reggae, R&B and rap music emphasize bass and put tremendous demands on low frequency loudspeakers. The SSP215 delivers the energy and power of modern music and it is built to take the stress of doing so continuously, to the extremes, without fail.

    The SSP215 is powered with a 2400W RMS amplifier. This is a continuous sine wave rating, not a peak or burst or EIAJ 8ms rating. Each 15” woofer has a 4” voice coil and a power handling rating of 1500W rms and 3000W program. 

    The smallest frontal dimension is only 17.5”, making it super versatile for placement options because it can fit under low stages, can be flown in low ceilings and can be tucked in corners or between furniture where larger boxes would not fit. Its large dimension is 48”, making it useful as a stack platform for getting the top boxes up above the audiences’ heads. It’s only 22.5” deep, making it a perfect truck-pack size. It’s tuned low, for use as a real subwoofer, with long-excursion, low distortion 15” woofers, and thanks to the lower mass of the 15” cones it delivers the tight, punchy sound as well as the deep, rolling bass.

    Extremely flat, delivering response that is +-3dB from 35Hz to 100Hz. No equalization is required to achieve this response. Unlike designs that require equalization, the SSP215’s tone, response and sensitivity are native to the design. Systems that require processing to achieve their stated response are still subject to the physical excursion and thermal limits of their drivers. Boosting low frequency EQ to achieve extended low-frequency response results in excessive distortion or woofer damage at full power unless limiting is applied. The limiting necessary to prevent failure also prevents the realization of their claimed frequency response at full power. The SSP215 does not suffer from these limitations. It faithfully delivers the low bass where most others either fade or fail.

    Versatile and Durable. Finished in extremely durable black textured weatherproof polyurethane coating, with a top-mounted pole socket in the SSP215 provides for mid-high loudspeakers to be mounted on a straight speaker pole above the subwoofer. The enclosures also feature four large rubber feet and corresponding recesses in their tops to facilitate interlocking the boxes when stacked. The woofers' cones are made from a waterproof fiber matrix.

    Engineered to work hard and continue to work where others fail. The BASSBOSS warranty provides 6 years of coverage against defects in materials and workmanship. The warranty DOES cover failed drivers, including burned voice coils, for 2 years from the date of purchase. If a voice coil, or anything else, fails within the warranty period, replacement parts will be provided without charge. (See warranty documentation for complete details). With the peace of mind afforded by plentiful, clean, undistorted output and comprehensive protection systems, you can confidently push the SSP215 to levels and depths that would otherwise require more or bigger cabinets.

    Numerous optional accessories – the Custom Fit Wheel Dolly allows for easy movement of one or two subs. Custom Made Protective Covers protect your subs and keep them looking new for years to come. The option to have the amplifier mounted in a rack chassis is also available. Please contact us for details.


        •    Half the Size of 218 Boxes
        •    Very Low Profile
        •    Deep Bass Output as 218s
        •    Truck Pack for Touring
        •    Tall for Stacking Tops
        •    2400W RMS Class D Amp

    The BASSBOSS SSP215 Profundo subwoofer delivers output to frequencies lower than many double 18” cabinets. Each individual SSP215 enclosure supplies intense, deep bass and uses around half the space and considerably less weight than a double 18".

    Ideal for the mobile professional who needs significant bass output but has limited transport space. For venues, the low-profile box can fit under the smallest of stages, and still power full-on dance floors with full and punchy bass. $3679.00 each. Free freight to commercial addresses.


    Contact Us to Order or for More Info



      Cut Sheet SSP215 Cut Sheet PDF Download
      Loudspeaker Description High-output Dual 15 in. Subwoofer
      Frequency Response (+-3 dB) 35 - 120 Hz
      Maximum Sustained Output 129 dB SPL, 1 meter, half-space (ground plane)
      Short-term Peak Output 132 dB
      Nominal Dispersion (°H x °V) 360 x 360


      Amplification 2400 Watt Continuous RMS Class D Amplifier  
      Processing Integrated comprehensive DSP provides high pass, low pass, time alignment and limiting
      Electrical Connectors, Amplifier Neutrik Powercon input (Blue) NAC3FCA
      Electrical Connector, Mains Standard US 3-pin 120V electrical plug: NEMA 5-15.(Edison) Optional electrical plugs available, including L5-30 and others, upon request. Please check the FAQ page for more information.  
      Voltage Operating Range 90-130V
      Current Draw, Nominal 3A @ 120 volts (typical, 1/8 max power)
      Signal Input Connector XLR-F
      Signal Output Connector XLR-M pass-through only


      Enclosure Type Helmholz resonator enclosure, optimally tuned for extended low frequency response with high sensitivity and high power handling

    Two - 15 in. dia (380 mm) neodymium motor woofer with 4 in. (100 mm) copper winding voice coil and 46 mm peak to peak excursion. Waterproof fiber composite cone

      Cabinet Construction 18 mm Baltic Birch plywood, extensively braced. Equipped with 16 flypoints; 2 pole sockets; 4 steel handles; 4 large rubber feet; 4 interlocking foot pockets  
      Dimensions (HxWxD) 17.2 in. x 48 in. x 22.5 in.
      Net Weight 165 lbs
      Shipping Weight 176 lbs
      Exterior Finish Weatherproof bonded high-pressure polyurethane
      Grill Black perforated, powder-coated steel


      Suspension System 16 - 3/8-16 threaded flypoints
      Installation Version Available without handles and pole sockets
      Amplification for Installation Complete power package including DSP in two rack space chassis
      Transport Dollies Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 to 2 cabinets
      Covers Heavy-duty padded nylon transport covers for 1 to 2 cabinets
      Compatible Top Boxes BASSBOSS Attuned Tops and BOSSMon Monitors


    Have questions about our products and technology? General discussions of audio science, club installations, live sound considerations, etc?

    BASSBOSS designer and founder David Lee has been designing loudspeakers and nightclub systems for over 30 years, and is happy to share his insights.

    You can shoot us an email, or check out the Forum for current discussions and to post your question there.

    Want a custom system built for you? Just give us a shout at (855) 822-7770 for personalized assistance!

    US + Worldwide Shipping

     Shipping in the Continental US

    Most speaker orders will be delivered by freight companies and require a loading dock. Residential freight deliveries are available and require an appointment, which may take longer than deliveries to commercial addresses, and cannot have guaranteed delivery dates. Please contact us for more information. 

    Most speaker orders will be delivered by freight. We will contact you directly with any relevant information to your order and shipment and to assist with scheduling of residential delivery, if required.

    Worldwide Freight

    We can ship to virtually any address in the world. Please note that there are restrictions on some products, and some products cannot be shipped to international destinations.

    We ship via international freight carriers worldwide, and are happy to assist with cost quoting, booking, customs and import duties questions and scheduling of freight.

    Please note, all international orders will require a photocopy of the credit card used and a photo ID before shipping. We will contact you directly to supply these items after your order has been placed.

    Please contact us for more information.

    Returns Policy - 30 Day Money Back Guarantee

    We sincerely believe you will be thrilled with every BASSBOSS product. To assure that, we offer a 30-day money back guarantee. If you are not completely satisfied with your purchase, simply return it. We're happy to work with you to find the best solution for your needs. You may exchange your order for another model or the purchase price will be refunded in full. Return shipping costs are not included in this offer.

    You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in most cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 3 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

    If you need to return or exchange an item, contact us for personalized service and an RMA, or call (512) 368-3268 for immediate assistance.

    BASSBOSS Warranty - Sound Defense

    Sound Defense is a fully-transferable, enhanced warranty program that adds coverage of all driver components, including subwoofer voice coils, for two years. With Sound Defense if a driver fails within the program term, it will be repaired or replaced without charge.

    BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase. Customers can also extend the “Sound Defense” program beyond the initial term through an annual subscription. Shipping costs are not included.


    BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of six years from the date of purchase against defects in materials and workmanship. This warranty does not cover items that are intended to wear and can be replaced if worn or damaged. Examples of items not covered by this warranty are cabinet feet, grills and the finish or coating applied to the cabinet.

    Please check the Warranty page for further information.