Incorporating innovative new technologies into rigidly braced, large vented boxes that are optimized for maximum output and reliability. The SSP218 is a loudspeaker system that sustains its output long-term and is practically impossible to blow thanks to the combination of extremely rugged, very high power handling, long excursion drivers, carefully optimized cabinet and port design and several effective but transparent protection systems. The protection systems effectively prevent thermal overload of the voice coils and minimize long-term thermal compression while having virtually no effect on the transient response and peak output of the loudspeaker.
Very high output, low frequency sound with extremely low distortion. The SSP218 system is optimized for full-power operation and is designed to operate at full rated RMS power throughout its operating range while the woofers remain within their X-max specification.
Extremely flat, delivering response that is +- 1.5dB from 32Hz to 100Hz. No equalization is required to achieve this response. Unlike designs that require equalization, the SSP218’s tone, response and sensitivity are native to the design. Systems that require processing to achieve their stated response are still subject to the physical excursion and thermal limits of their drivers. Boosting low frequency EQ to achieve extended low-frequency response results in excessive distortion or woofer damage at full power unless limiting is applied. The limiting necessary to prevent failure also prevents the realization of their claimed frequency response at full power. The SSP218 does not suffer from these limitations. It faithfully delivers the low bass where most others either roll off or die trying.
Versatile and durable, the cabinet is finished in black textured weatherproof polyurethane coating. A top-mounted pole socket in each SSP218 provides for mid-high loudspeakers to be mounted on a straight speaker pole above the subwoofer. The enclosures also feature four large rubber feet and corresponding recesses in their tops to facilitate interlocking the boxes when stacked. The woofers' cones are made from a waterproof fiber matrix.
Engineered to work hard and continue to work where others fail. The BASSBOSS warranty provides 6 years of coverage against defects in materials and workmanship. The warranty DOES cover failed drivers, including burned voice coils, for 2 years from the date of purchase. If a voice coil, or anything else, fails within the warranty period, replacement parts will be provided without charge. (See warranty documentation for complete details). With the peace of mind afforded by plentiful, clean, undistorted output and comprehensive protection systems, you can confidently push the SSP218 Subwoofer to levels and depths that would otherwise require more or bigger cabinets.
Optional accessories – the Custom Fit Wheel Dolly allows for easy movement of one or two subs. Custom Made Protective Covers for One or a Stack of Two Subwoofers protect your subs and keep them looking new for years to come. The option to have the amplifier mounted in a rack chassis is also available.
• Solid, Flat Response To 30 Hz
• Powerful, Loud, Deep Bass
• Compact, Easy Transport
• Protected, Self-Powered System
• Excellent Output-To-Size Ratio
• Quick And Easy Setup
• 4000W RMS Class D Amp
An unbeatable combination of sensitivity, depth, power handling, fidelity and value. The SSP218 offers the most cost-effective solution for those who need big bass, providing huge low end for the price.
Delivering massive output at and above 30Hz, reliably, consistently and with great fidelity. Modern electronic, jazz, reggae, pop and R&B music emphasize bass and put tremendous demands on low frequency loudspeakers. The SSP218 delivers the energy and power of modern music and it is built to take the stress of doing so continuously, to the extremes, without fail. $4195.00 each. Free freight to commercial addresses.
|Cut Sheet||SSP218 Cut Sheet PDF Download|
|Información en Español||SSP218 Cut Sheet PDF Descargue el Archivo|
|Loudspeaker Description||High-output Dual 18 in. Subwoofer|
|Frequency Response (+-3 dB)||30 - 100 Hz|
|Maximum Sustained Output||135 dB SPL, 1 meter, half-space (ground plane)|
|Short-term Peak Output||141 dB|
|Nominal Dispersion (°H x °V)||360 x 360|
|Amplification||4000 Watt Continuous RMS Class D Amplifier|
|Processing||Integrated comprehensive DSP provides high pass, low pass, time alignment and limiting|
|Electrical Connector, Amplifier||Neutrik Powercon input (Blue) NAC3FCA|
|Electrical Connector, Mains||Standard US 3-pin 120V electrical plug: NEMA 5-15.(Edison) Optional electrical plugs available, including L5-30 and others, upon request. Please check the FAQ page for more information.|
|Voltage Operating Range||90-130V|
|Current Draw, Nominal||4.6A @ 120 volts (typical, 1/8 max power)|
|Signal Input Connector||XLR-F|
|Signal Output Connector||XLR-M pass-through only||
|Enclosure Type||Helmholz resonator enclosure, optimally tuned for extended low frequency response with high sensitivity and high power handling|
|Transducers||Two 18 in. dia (457 mm) neodymium motor woofers with 4 in. (100 mm) copper winding voice coils and 56 mm peak to peak excursion. Waterproof fiber composite cone|
|Cabinet Construction||18 mm Baltic Birch plywood, extensively braced. Equipped with 2 pole sockets; 4 steel handles; 4 large rubber feet; 4 interlocking foot pockets|
|Dimensions (HxWxD)||22.5 in. x 48 in. x 29.5 in. (23.25 in. high with feet)|
|Net Weight||199 lbs|
|Shipping Weight||230 lbs|
|Exterior Finish||Weatherproof bonded high-pressure polyurethane|
|Grill||Perforated, powder-coated steel|
|Suspension System||16 - 3/8-16 threaded flypoints||
|Flying Hardware||Side-pull anchors and/or shoulder eyebolts|
|Installation Version||Available without handles and pole sockets|
|Amplification for Installation||Complete power package including DSP in two rack space chassis|
|Transport Dollies||Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 to 3 cabinets|
|Covers||Heavy-duty padded nylon transport covers for 1, 2 or 3 cabinets|
Have questions about our products and technology? General discussions of audio science, club installations, live sound considerations, etc?
BASSBOSS designer and founder David Lee has been designing loudspeakers and nightclub systems for over 30 years, and is happy to share his insights.
You can shoot us an email, or check out the Forum for current discussions and to post your question there.
Want a custom system built for you? Just give us a shout at (855) 822-7770 for personalized assistance!
Most speaker orders will be delivered by freight companies and require a loading dock. Residential freight deliveries are available and require an appointment, which may take longer than deliveries to commercial addresses, and cannot have guaranteed delivery dates. Please contact us for more information.
Most speaker orders will be delivered by freight. We will contact you directly with any relevant information to your order and shipment and to assist with scheduling of residential delivery, if required.
We can ship to virtually any address in the world. Please note that there are restrictions on some products, and some products cannot be shipped to international destinations.
We ship via international freight carriers worldwide, and are happy to assist with cost quoting, booking, customs and import duties questions and scheduling of freight.
Please note, all international orders will require a photocopy of the credit card used and a photo ID before shipping. We will contact you directly to supply these items after your order has been placed.
Please contact us for more information.
Returns Policy - 30 Day Money Back Guarantee
We sincerely believe you will be thrilled with every BASSBOSS product. To assure that, we offer a 30-day money back guarantee. If you are not completely satisfied with your purchase, simply return it. We're happy to work with you to find the best solution for your needs. You may exchange your order for another model or the purchase price will be refunded in full. Return shipping costs are not included in this offer.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in most cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 3 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return or exchange an item, contact us for personalized service and an RMA, or call (512) 368-3268 for immediate assistance.
BASSBOSS Warranty - Sound Defense
Sound Defense is a fully-transferable, enhanced warranty program that adds coverage of all driver components, including subwoofer voice coils, for two years. With Sound Defense if a driver fails within the program term, it will be repaired or replaced without charge.
BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase. Customers can also extend the “Sound Defense” program beyond the initial term through an annual subscription. Shipping costs are not included.
STANDARD CABINET WARRANTY
BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of six years from the date of purchase against defects in materials and workmanship. This warranty does not cover items that are intended to wear and can be replaced if worn or damaged. Examples of items not covered by this warranty are cabinet feet, grills and the finish or coating applied to the cabinet.
Please check the Warranty page for further information.