Loading... Please wait...

AT212 Powered Main Speaker

Ships within Three Days
79.00 LBS
Free Shipping

     AT212 Attuned Top Powered Speaker

    Exceptionally high-quality drivers, featuring dual direct-radiating 12” high-efficiency neodymium magnet woofers and a 1.4” exit compression driver that is loaded on an 80 by 60 degree horn. With the cabinet standing vertically, the horn has a horizontal coverage of 80 degrees. The horn is rotatable for situations where the cabinet is flown horizontally, ideal for low-profile placement on a ceiling, above a dance floor or as a near-field fill.

    On the 1500 watt Powersoft Class D amp, an input gain control allows adjustment from +12dB through -12dB and off. The amplifier features a global power supply that can operate on voltages from 90 to 250V using only 3.6A at 120V and 2.2A at 240V.

    Dual 12” low frequency drivers were chosen to minimize the cabinet frontal area while delivering the best possible speed and impact in the mid-bass and midrange frequencies. The 4-foot tall box elevates the high frequency section to a minimum of 7’5” on center when stacked on the matching subwoofer systems, such as the SSP218, SSP215, or pairs of the SSP118.  

    For the Mobile Professional:

    At only 79 lbs it is particularly well suited to applications where light weight is required. One-person set-up of a substantial system is not only possible; it’s realistic. The AT212 transports on top of the SSP218 subwoofers when they are on their wheel carts, making load-in and set-up of systems incredibly fast and easy.

    A very effective, practical, high fidelity 3-way active loudspeaker system when combined with BASSBOSS powered subwoofers. In most venues it’s possible to roll the system into place, lock the casters, tilt up the tops, plug in the power and signal and be ready to play in a few short minutes. The supreme simplicity and ease with which these components work together will delight anyone who is regularly moving gear. 

    Their high fidelity, abundant power, easy setup and rock-solid reliability make them extremely versatile. Whether you use them for club installations, rentals, productions, band gigs or mobile DJ gigs, you want something that’s easy to load in and difficult to mess up. It’s great to have a system that one person can set up and take down in a very short time, one that uses minimal electricity, has built-in limiting and protection and seriously rocks a crowd.

    Weatherized version available for outdoor installations features rack-mounted amplification and waterproof input connections along with a fiberglass underlayed finish, silicone sealed gaskets, stainless steel grill and hardware and a hydrophobic grill cloth. 


        •    High Output, Efficient
        •    1500 W EIAJ Powersoft Class D Amp
        •    Self-Powered, Self Processing
        •    Light Weight for Easy Set-Up
        •    Flyable Horizontally or Vertically
        •    Wide Coverage Rotatable Horn

    The AT212 Attuned Top is a 2-way, self-powered, bi-amplified loudspeaker for short to medium distance coverage. It’s a simple to use, easy to set up, attractive, compact, light weight trapezoidal top cabinet capable of high output while maintaining a smooth sound and natural musical character.

    A 1500W EIAJ Powersoft class D module provides amplification. An integrated DSP provides a comprehensive set of functions including a high-pass filer, crossover filters, limiting, equalization and time-alignment. Four presets allow tailoring the sound to suit the application from a near-field indoor setting through to an outdoor, long-throw setting $3217.00 each. Free freight to commercial addresses.



    Contact Us to Order or for More Info



      Cut Sheet AT212 Cut Sheet PDF Download
      Loudspeaker Description Mid-high cabinet with 80 x 60 degree (rotatable) coverage for multiple applications including ground stack and horizontal or vertical flying
      Frequency Response (+-3 dB) 100 Hz - 18 kHz
      Maximum Sustained Output 128 dB
      Short-term Peak Output 134 dB
      Nominal Dispersion (°H x °V) 80 x 60, rotatable to 60 x 80


      Amplification 1500 Watt Two Channel Powersoft Class D
      Processing Comprehensive including High-Pass, Low-Pass, Parametric EQ, phase alignment and limiting.
      Electrical Connectors Neutrik PowerCON in and through
      Voltage Operating Range 90-250V. Auto-sensing, auto switching universal supply
      Current Draw, Nominal 3.6A @120V, 2.2A @240V
      Signal Input Connector XLR-F
      Signal Output Connector XLR-M pass-through only


      Enclosure Type 2-way mid-high. Direct radiating vented LF section, horn-loaded HF section
      Transducers, LF

    2 x 12 inch diameter (300 mm) neodymium motor woofer with 3 inch (76 mm) voice coils, waterproof cones

      Transducer, HF 1 x 1.4 in. exit, 3 inch (76 mm) diameter voice coil compression driver mounted to an 80 by 60 degree constant directivity horn
      Cabinet Construction 15mm Baltic Birch plywood, 18mm baffle, dado joinery, 4 steel bar handles, 15 degree side angle trapezoid
      Dimensions (HxWxD) 47.75 in. x 14.3 in. front (5.3 in. rear) x 17.75 in.
      Net Weight 79 lbs
      Shipping Weight 88 lbs
      Exterior Finish, Touring Weatherproof bonded high-pressure polyurethane
      Exterior Finish, Installation Textured Epoxy Paint, Black or White
      Exterior Finish, Weatherized Fiberglass underlayed UV treated bonded high-pressure polyurethane with silicone seals and stainless steel grill
      Grill Black perforated, powder-coated steel


      Suspension Points Eight 3/8 in. - 16 TPI, Two top, two bottom, four back.
      Flying Array Bracket Allows arrays of cabinets to be flown from two points
      Side-pull Anchors For use when flying cabinets horizontally
      Shoulder Eye Bolts For use when flying cabinets vertically
      Covers Heavy-duty padded nylon transport covers
      Weatherized Version Suitable for permanent outdoor installations


    Have questions about our products and technology? General discussions of audio science, club installations, live sound considerations, etc?

    BASSBOSS designer and founder David Lee has been designing loudspeakers and nightclub systems for over 30 years, and is happy to share his insights.

    You can shoot us an email, or check out the Forum for current discussions and to post your question there.

    Want a custom system built for you? Just give us a shout at (855) 822-7770 for personalized assistance!

    US + Worldwide Shipping

     Shipping in the Continental US

    Most speaker orders will be delivered by freight companies and require a loading dock. Residential freight deliveries are available and require an appointment, which may take longer than deliveries to commercial addresses, and cannot have guaranteed delivery dates. Please contact us for more information. 

    Most speaker orders will be delivered by freight. We will contact you directly with any relevant information to your order and shipment and to assist with scheduling of residential delivery, if required.

    Worldwide Freight

    We can ship to virtually any address in the world. Please note that there are restrictions on some products, and some products cannot be shipped to international destinations.

    We ship via international freight carriers worldwide, and are happy to assist with cost quoting, booking, customs and import duties questions and scheduling of freight.

    Please note, all international orders will require a photocopy of the credit card used and a photo ID before shipping. We will contact you directly to supply these items after your order has been placed.

    Please contact us for more information.

    Returns Policy - 30 Day Money Back Guarantee

    We sincerely believe you will be thrilled with every BASSBOSS product. To assure that, we offer a 30-day money back guarantee. If you are not completely satisfied with your purchase, simply return it. We're happy to work with you to find the best solution for your needs. You may exchange your order for another model or the purchase price will be refunded in full. Return shipping costs are not included in this offer.

    You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in most cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 3 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

    If you need to return or exchange an item, contact us for personalized service and an RMA, or call (512) 368-3268 for immediate assistance.

    BASSBOSS Warranty - Sound Defense

    Sound Defense is a fully-transferable, enhanced warranty program that adds coverage of all driver components, including subwoofer voice coils, for two years. With Sound Defense if a driver fails within the program term, it will be repaired or replaced without charge.

    BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase. Customers can also extend the “Sound Defense” program beyond the initial term through an annual subscription. Shipping costs are not included.


    BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of six years from the date of purchase against defects in materials and workmanship. This warranty does not cover items that are intended to wear and can be replaced if worn or damaged. Examples of items not covered by this warranty are cabinet feet, grills and the finish or coating applied to the cabinet.

    Please check the Warranty page for further information.