A 3000W EIAJ Powersoft class D module provides amplification. An integrated DSP provides a comprehensive set of functions including a high-pass filer, crossover filters, limiting, equalization and time-alignment. Four presets allow tailoring the sound to suit the application from a near-field indoor setting through to an outdoor, long-throw setting. An input gain control allows adjustment from +12dB through -12dB and off. The amplifier features a global power supply that can operate on voltages from 90 to 264V using only 5A at 120V and 2.5A at 240V for typical music program.
Dual 12” low frequency drivers were chosen to minimize cabinet frontal area while delivering the best possible speed and impact. Using separate drivers for the low frequency section of the box allows the 12" midrange section's excursion to be limited to 3mm at maximum power, which helps to prevent the intermodulation distortion that can occur in 2-way co-axial systems. Such short excursion of the midrange driver also minimizes motor and suspension related distortion, ensuring extremely high-resolution reproduction at very high levels. Its driver compliment incorporates dual 12” woofers in a vented enclosure for low frequencies and a 12” midrange driver in a sealed enclosure with a co-axially mounted 1.4” exit compression driver. Coverage is 80 degrees conical.
The AT312 is a co-axial point-source, which delivers more consistent off-axis performance than conventional loudspeakers with separated mid and high frequency drivers. This feature enhances resolution at all listening positions. The consistency of coverage also enhances the loudspeaker's versatility, allowing it to be mounted horizontally or vertically with no compromise in coverage or performance.
Transportation and set-up of the SSP218/AT312 combination is easy because the subwoofers serve as a rolling carrier for the tops. In most venues it’s possible for one person to roll the system into place, lock the casters, tilt up the tops, plug in the power and signal and have an extremely substantial system ready to play in a few short minutes. The 48” tall box elevates the mid and high frequency radiators to a minimum of 7’6” on center when stacked on BASSBOSS subwoofer systems. The cabinets also include an interlock socket to secure them in place on top of BASSBOSS subwoofers.
For installations the AT312 makes a very effective, practical, high fidelity 4-way active loudspeaker system when used with BASSBOSS powered subwoofers. Standard equipment includes 6 suspension points for horizontal or vertical orientation. Equally at home in a high-end listening room, on a pumping dance floor or in a large auditorium, the AT312's versatility puts high fidelity and amazing resolution anywhere and everywhere you need it.
• Outstanding Sound Quality
• Compact, High-Output 3-Way
• Lightweight and Low-Profile
• Symmetrical Coverage
• Tall, Thin Design
• One Person Set-Up
The AT312 Attuned Top is a co-axial point-source cabinet for medium to short distance coverage where high output, a small footprint and very high fidelity are required. It’s compact, simple to use, easy to set up, attractive and capable of very high output with superbly uncolored sound and natural musical character.
The AT312 is an extremely high-resolution 4-way active loudspeaker. When combined with BASSBOSS subwoofers, the result is a system with virtually unparalleled resolution and dynamic power for its size. I One-man set up of a substantial system is made easy because the AT312 cabinets weigh only 89 lbs each. $4416.00 each. Free freight to commercial addresses.
|Cut Sheet||AT312 Cut Sheet PDF Download|
|AT312 Owner's Manual||Download Manual|
|Loudspeaker Description||Point-source mid-high cabinet with 80 degree conical coverage for horizontal or vertical applications|
|Frequency Response (+-3 dB)||80 Hz - 18 kHz|
|Maximum Sustained Output||126 dB|
|Short-term Peak Output||132 dB|
|Nominal Dispersion (°H x °V)||80 x 80|
|Amplification||3000 Watt 4 Channel Class D Powersoft Amplifier|
|DSP||Comprehensive processing including High-pass, Low-pass, EQ, alignment and limiting|
|Electrical Connectors, Amplifier||Neutrik Powercon in and through|
|Electrical Connector, Mains||NEMA5-15 (Edison) or Powercon loop-through jumper (for use above subwoofer) on request|
|Voltage Operating Range||90-250V. Auto-sensing, auto switching universal supply|
|Current Draw, Nominal||5A @ 120V, 2.5A @ 240V|
|Controls||Level control from +12dB to -12dB, preset selector button|
|Display||LEDs for Power/ready, Signal, Clip and Protect. LED indicating selected preset|
|Signal Input Connector||XLR-F|
|Signal Output Connector||XLR-M pass-through only||
|Enclosure Type||3-way mid-high. Helmholz resonator LF section, acoustic suspension MF section with co-axially mounted, horn-loaded HF section|
|Low Frequency Transducers||
2 x 12 in. dia (300 mm) neodymium motor woofer with 3 in. (76 mm) voice coil, waterproof cone
|Mid Frequency Transducer||12 in. dia. (300 mm) neodymium motor midrange driver with co-axial HF exit|
|High Frequency Transducer||ÈÀ1.4 in. exit 3 in. (76 mm) voice coil compression driver mounted to 80 degree conical wave guide|
|Cabinet Construction||18mm Baltic Birch plywood, dado joinery, integrated handles, 20 degree side angle trapezoid|
|Suspension Points||6 x 3/8 inch - 16 TPI internally braced threaded mounting points|
|Dimensions (HxWxD)||48 inches (122cm) x 15.75 inches (40cm) front, 8 inches (20cm) rear x 13.5 inches (34.5cm)|
|Net Weight||89 lbs|
|Shipping Weight||104 lbs|
|Exterior Finish||Weatherproof bonded high-pressure polyurethane|
|Grill||Black perforated, powder-coated steel||
|Side-Pull Anchors||For use when flying cabinets horizontally|
|Shoulder Eye Bolts||For use when flying cabinets vertically|
|Covers||Heavy-duty padded nylon transport covers|
Have questions about our products and technology? General discussions of audio science, club installations, live sound considerations, etc?
BASSBOSS designer and founder David Lee has been designing loudspeakers and nightclub systems for over 30 years, and is happy to share his insights.
You can shoot us an email, or check out the Forum for current discussions and to post your question there.
Want a custom system built for you? Just give us a shout at (855) 822-7770 for personalized assistance!
Most speaker orders will be delivered by freight companies and require a loading dock. Residential freight deliveries are available and require an appointment, which may take longer than deliveries to commercial addresses, and cannot have guaranteed delivery dates. Please contact us for more information.
Most speaker orders will be delivered by freight. We will contact you directly with any relevant information to your order and shipment and to assist with scheduling of residential delivery, if required.
We can ship to virtually any address in the world. Please note that there are restrictions on some products, and some products cannot be shipped to international destinations.
We ship via international freight carriers worldwide, and are happy to assist with cost quoting, booking, customs and import duties questions and scheduling of freight.
Please note, all international orders will require a photocopy of the credit card used and a photo ID before shipping. We will contact you directly to supply these items after your order has been placed.
Please contact us for more information.
Returns Policy - 30 Day Money Back Guarantee
We sincerely believe you will be thrilled with every BASSBOSS product. To assure that, we offer a 30-day money back guarantee. If you are not completely satisfied with your purchase, simply return it. We're happy to work with you to find the best solution for your needs. You may exchange your order for another model or the purchase price will be refunded in full. Return shipping costs are not included in this offer.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in most cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 3 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return or exchange an item, contact us for personalized service and an RMA, or call (512) 368-3268 for immediate assistance.
BASSBOSS Warranty - Sound Defense
Sound Defense is a fully-transferable, enhanced warranty program that adds coverage of all driver components, including subwoofer voice coils, for two years. With Sound Defense if a driver fails within the program term, it will be repaired or replaced without charge.
BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase. Customers can also extend the “Sound Defense” program beyond the initial term through an annual subscription. Shipping costs are not included.
STANDARD CABINET WARRANTY
BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of six years from the date of purchase against defects in materials and workmanship. This warranty does not cover items that are intended to wear and can be replaced if worn or damaged. Examples of items not covered by this warranty are cabinet feet, grills and the finish or coating applied to the cabinet.
Please check the Warranty page for further information.