MFLA Powered Line Array

2 x 12″ Medium Format Line Array

Focused + Formidable

Extraordinarily Powerful, Massive Output, True Line Array

  • Full-Range Performance
  • Exceptional Midrange Resolution
  • Ultra-Wide 120º Horizontal Coverage
  • Superior Projection of High Frequencies

Delivers a remarkable combination of flat frequency response, intense output, broad coverage and long throw.

More Info  |  Specs


MFLA Powered Line Array

Ready to Roll

WHY CHOOSE an MFLA Line Array?

The MFLA features extremely high output, low distortion, wide coverage, simple setup and very long-throw performance. Horizontal dispersion is 120 degrees combined with 10 degrees of vertical dispersion. The flyware is adjustable in 1 degree increments from 0 to 10 degrees.

The MFLA incorporates proprietary technology to create isophasic midrange radiation with coherent vertical coupling between elements for longer throw, while also providing wider horizontal dispersion from the 12” woofers.

Don't hold back!

BASSBOSS subs are optimized for full-power usage.

Multiple proprietary protection technologies ensure that the woofers remain within their excursion and thermal limits, so they don't break or burn like other subs. BASSBOSS provides much higher levels of deep bass than mass-market subs, reliably.

With plenty of headroom to keep up with the most enthusiastic crowd and not run out of bass.

So turn it up, and keep it up. BASS is good for you.

BASSBOSS not responsible for noise complaints.


Proprietary Technologies

BASSBOSS BrainThe MFLA cabinet features innovations in performance and practicality.   The forward output of the dual 12″ woofers passes through a multi-aperture diffraction matrix that distributes mid-range energy evenly and in phase over the height of the cabinet. This matrix thereby reduces the acoustical source spacing to provide exceptional projection of mid-range frequencies. The matrix also shifts upper-midrange frequency output toward the center of the cabinet, which broadens the horizontal dispersion of the midrange frequencies. Because this technology allows the MFLA to deliver coherent midrange propagation from a symmetrical 2-way design, the high frequency lenses can be utilized for extremely wide horizontal coverage, even often eliminating the need for front-fills.

The rear output of the woofers enters a vented enclosure that features integrated damper structures that enhance midrange clarity along with extensive bracing for minimal resonance. The vents are located to further improve midrange clarity and provide for wider horizontal coverage capability while they do their primary duty of delivering exceptional low frequency performance. Their location also provides for a secondary function of ducting cool air directly over the low-frequency driver motors for reduced thermal compression and improved reliability.

Fixed-Point Flyware ensures absolutely consistent box-to-box alignment.  The high-frequency output remains coherent at higher frequencies because the cabinets cannot move front-to-back once the pins are inserted. This precision alignment in the direction that influences time domain is critical for the phase of high-frequency signals to remain coherent from box to box. This feature dramatically improves the very high-frequency propagation effectiveness of the entire array, allowing the MFLA to deliver pristine highs at greater distances.

The MFLA Flyware features a simultaneous compression and tension mechanism, allowing the cabinets to be flown or ground stacked using the same simple setup. The proprietary flyware design ensures there is no slack and no shifting in the box alignment once the boxes are pinned. The mechanism allows for single-handed adjustment of splay angles for ground-stacked operation or in preparation for flying.

Hand-Built Cabinets

BASSBOSS cabinets are CNC machined and hand-built in the USA. Constructed from 15mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives. The cabinets feature integrated interior reflection and resonance control structures and are extensively braced. Created to stand up to intense use. The cabinets are finished in an extremely rugged, black polyurethane coating and feature polyethylene sliders, stainless steel fasteners and CNC machined, powder-coated metal suspension linkage. Rolling ground-support carts, heavy duty padded covers and road-cases are available to make transporting the arrays easy and safe.

BASSBOSS subwoofers are available to fly above or support below the MFLAs to extend system performance to well below 30Hz. The MFLA’s remarkable output can be combined with subwoofers for extended low frequency response and intensely high low-frequency output levels.  Several subwoofer options are available including 18″ and 21″ driver versions. Flyware-equipped subwoofers can be used as ground-supports for arrays of up to 6 MFLA boxes.

Prodigious Amplification

A 3000W RMS amplifier provides the MFLA with very high SPL capabilities and plenty of dynamic headroom. Low current draw and light weight relative to their output capacity means you can provide intense sound with less power and fewer boxes.

The comprehensive processing ensures consistent, undistorted high-SPL operation and maximum reliability. All the processing necessary for linear frequency response and phase coherent operation are pre-programmed into the DSP, delivering exceptional dynamic resolution and detail along with precise control. The proprietary processing programmed into the BASSBOSS MFLA provide the ease of plug-and-play operation and very simple and easy setups. You also get the peace of mind that comes from knowing that the multi-tiered limiters make the system virtually indestructible.

Rugged Drivers

B&C LineArrayElectrical power is converted into acoustical energy by a pair of 12″ neodymium motor woofers and a pair of 1.4″ throat neodymium compression drivers. The premium-quality 12″ drivers feature 3.5″ aluminum voice coils with a combined power handling rating of 2800W program.

High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet. An aluminum demodulating ring provides for increased high frequency response and reduced distortion. A ventilated voice coil gap improves cooling and reduces thermal compression.

The cones are waterproofed to protect them from possible accidental exposure to moisture or rain.

High frequencies are handled by two 1.4″ throat Neodymium compression drivers featuring 64mm aluminum voice coils and Titanium diaphragms mounted to two cast aluminum isophasic wave guides that provide 120 degree horizontal dispersion and are protected from the elements by a hydrophobic screen.

Waterproofed cones are included in all products. Optional weather resistant and fully weatherized versions are available which have the same acoustical performance as our standard options. If your portable system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products. Weatherized versions are modified and treated to survive permanent exposure to the elements.

Focused Tuning

BASSBOSS speakers can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and includes all necessary high-pass and low-pass filters along with equalization and phase alignment processing to ensure coherent response when deployed with BASSBOSS subwoofers.

There is no need for any additional EQ in the signal path for the speaker to provide a broad, flat frequency response. Sophisticated DSP programming ensures the speakers deliver consistent sound quality no matter the input level.

Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.

True Specifications

BASSBOSS technical specs are based on measurements of continuous performance in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.

BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear. 

Read more about BASSBOSS Designer David Lee’s specifications philosophy on ProSoundNetwork.


They heard sounds in their music they’ve never heard before.

Nasty Nate

We recently did Council, an outdoor music festival in Austin TX. I had many DJs tell me how good the BASSBOSS system sounded. They said they heard sounds in their music they’ve never heard before. We had 3 stages running, and two of them had bigger sound systems that cost way more money. The BASSBOSS sounded much better!

All the money in the world couldn’t get you better sound.

Neil Heller

If you are looking to please your customers with pure sonic bliss, and the kind of bass that will get people talking about your rig, then look no further.



Loudspeaker Description Horizontally Symmetrical, Self-powered, Vented Line Array element with Pressure-Phase Distributed midrange loading and isophasic high-frequency wave guides.
Frequency Response (±3 dB) 60-18,000Hz
Sensitivity LF – 104dB, HF 113dB
Maximum Sustained Output 136dB
Max SPL (Peak)* 139dB
Nominal Dispersion (H° x V°) 120 x 10


Amplification 3000 Watt EIAJ Class D Amplifier
Processing Integrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and limiting
Electrical Connectors, Amplifier Neutrik powerCON Input (Blue) NAC3FCA, Neutrik powerCON Through (White) NAC3FCA
Electrical Connector, Mains Standard US 3-pin 120V – Optional connectors may be specified at time of order
Voltage Operating Range 90-250V AC, 50-60Hz. Auto-sensing, auto-switching, PFC universal power supply
Current Draw, Nominal 3.6A @ 120 volts; 2A @ 220 volts (typical, 1/8 max power)
Signal Input Connector XLR-F
Signal Output Connector XLR-M (pass-through only)


Cabinet Construction CNC machined 15mm multi-ply laminate with extensive bracing and dado joinery. External flyware and linking mechanism
Transducer (Low Frequency) 2 x 12 in. diameter (300mm) Neodymium motor woofer with 3.5 in. (89mm) voice coil, waterproof cone
Transducer (High Frequency) 2 x 1.4 in. (36mm) exit compression drivers with 2.5 in. (63.5mm) voice coils mounted to isophasic wave guides
Dimensions (HxWxD) 16.125 in. x 40.5 in. x 20.375 in. (Including Flyware)
Flyware Integrated line array flyware, adjustable in one degree increments from 0 to 10 degrees.
Net Weight 104 lbs
Shipping Weight 130 lbs
Exterior Finish Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating
Grill Perforated, powder-coated steel
Handles 2 Integrated Handles


IP Connections IP-65 rated power and signal connections available for moisture resistance
Flight Case Multi-box Touring Cases for up to 5 cabinets
Array Frame (Bumper Bar) Standard Rigging Frame with multiple lifting points
Covers Multi-box soft covers for up to 4 cabinets when on a rolling cart
Transport Dolly Ground Support Rolling Cart – provides angle adjustment when used for ground support deployment

Our proactive philosophy causes specifications to be subject to change whenever improvements are made.

*Peak output is calculated using “industry standard” techniques. These calculation methods create theoretical specifications that are inflated over what can actually be achieved. BASSBOSS real world output specifications are provided as “Maximum Sustained Output” ratings, which reflect actual measured, continuous output levels.


MFLA Powered Line Array

MFLA Powered Line Array

Extraordinarily High Powered Line Array. 3000 watt amplifier, massive output, true isophasic line array technology, very compact form. Easy to transport.


Contact us for assistance!


Business and Consumer Financing - Apply Online

Want to finance a dream system in easy monthly installments? Apply here.

Have questions regarding financing BASSBOSS gear?
Give us a call - we're happy to help.

We now accept the Synchrony home card!


Shop again and again at thousands of participating retail locations, for your audio & home needs.*

  • Promotional financing offers** with convenient monthly payments
  • A dedicated credit line for home purchases (flooring, furniture, appliances, electronics and more)
  • No annual fee for new accounts
  • Special sales events and savings offers* from participating retailers
  • $0 fraud liability
  • 24/7 secure, online account management tools

*Subject to credit approval **Participating locations


Synchrony Home Card Main Page | Synchrony Home Card Application Page

With our partner Community Finance, apply for consumer financing online and get an answer in minutes.

BASSBOSS offers financing through industry leader Hampton Ridge Financial.

Ideal if you are NOT running an existing audio-business. Click here to apply.

Financing for equipment purchases of $3,000+ Click here to apply.


  • 60 days to pay with no interest!
  • Convert to a 12 month loan or pay off in 60 days
  • Get started in minutes, no obligation
  • Apply with a business checking account, not your credit score

Pay now or pay over time with PayPal Credit. Just use PayPal Credit in PayPal checkout.

No Interest if paid in full in 6 months on purchases of $99 or more.

✛ Synchrony Home Offer – cannot be combined with any other offers or prior quotes, interest is deferred during the promotional period, the entire finance amount must be paid by the end of the promotional period to avoid finance charges, not valid on dealer sales, additional terms and conditions may apply. Please contact our sales team for details and sales assistance.


A decorative space saving speaker stand that is also durable and stable. The heavy cast iron plate with a relatively small diameter requires little space.


Round Base Speaker Stand

Tired of breaking, bending, or generally destroying your speaker stands? Protect your investment with these extremely stable and well-constructed speaker stands.


Ultra Heavy Duty Ring Lock Speaker Stand

Tripod speaker stand set with bag. Featuring a patented expanding mandrel that holds speakers straight and tight so they won't tilt to one side or rattle at high levels.


Ultra Heavy Duty Ring Lock Speaker Stand Set W/Carry-bag

Unshakable and Stalwart! This high quality, height adjustable speaker pole guarantees a secure, stable and quiet connection between subwoofers and satellite systems.


Ring Lock Distance Rod

Unshakable and Stalwart! This high quality, height adjustable speaker pole guarantees a secure, stable and quiet connection between subwoofers and threaded satellite systems.


M20/Ring Lock Distance Rod

Support Poles - 4' Pocket Locking Poles for Mounting Tops to Subs. These poles elevate tops off subs for better sound and increased stability.


4 Foot Support Poles for Tops

BASSBOSS custom-designed covers protect your Tops & MicroMains and keep them looking new for years to come. Made in the USA, covered by an unconditional lifetime warranty. Keep your investment protected from gig wear and tear. Choose Top or MicroMain model below.


BASSBOSS Custom Cover for CCM112 Powered Loudspeakers

More Photos
System Builders

Want to roll your own?

Mobile Guided System Builder for one-person use.

Production Builder for larger mobile systems.

Pre-Built Systems are ready to roll.

BASSBOSS Catalog for the full catalog.

You may also like...