CCM112 Powered Floor Monitor

Super Compact, Supremely Adaptable

BASSBOSS CCM112 Powered Monitor Loudspeaker

In a Word, It’s Versatile

  • Superior Rejection Of Feedback
  • Ultra Small Size And Light Weight
  • Four Deployment Angles + Mount

A very compact bi-amplified, self-powered multi-angle wedge/utility monitor. The CCM112 monitor can also be mounted on a pole stand to be used as an extremely size-conscious main speaker or DJ monitor.

More Info  |  Specs

US$1,895

CCM112 Powered Monitor

Performer’s Dream

WHY CHOOSE A CCM Monitor?

Sound heard to the left, right, above and below the speaker is very consistent. For the audience, this means better quality sound across the entire listening area. For the performer this means less peaky response and fewer problems with feedback relative to where the microphone is moved.

Very consistent sound across the broad 80-degree conical coverage pattern of the speaker is delivered because of the true point-source nature of the co-axial design. Any speaker that has the tweeter horizontally or vertically offset from the mid-frequency driver produces very different response as one moves through its coverage area from the tweeter side to the woofer side. This is due to the different distances the sound has to travel to reach the ears. This issue is eliminated in the CCM112.

Musicians love this monitor. To ensure the best possible performances, the players need to hear themselves clearly, cleanly and concisely. The CCM112 was designed to provide the high and mid frequencies that performers rely on to bring their best.

No need to hold back!

BASSBOSS Tops and MicroMains are optimized and protected for safe, high-power operation.

All BASSBOSS loudspeakers are complete systems. Optimized cabinet design, premium quality drivers, power-matched amplification and comprehensive processing ensure that no matter the demand, they keep their cool, keep their character and keep on working.

So don't doubt - turn it up! Great sound feels good.
speakerheadphonespeace-sign2sunglasses

BASSBOSS Designs

Hand-Built Cabinets

BASSBOSS CCM112 Powered Monitor LoudspeakerThe CCM112 Monitor has a smoother, more intelligible response on stage due to its point-source design. This allows greater gain before feedback.

It is extremely compact, so doesn’t get in the way of sight lines of the performers. The extra area that the tweeter would ordinarily take up on the front of the speaker is eliminated. Instead the tweeter exits through the middle of the woofer, making it possible to make the cabinet barely bigger than a 12″ woofer yet still incorporate a compression driver and horn, a 700W amplifier and an integrated digital signal processor in a single cabinet.

The CCM112 has 4 angles in which it can be placed. It can be used as a floor monitor for a standing performer, or as a floor monitor for a seated performer. It also has a shallower angle that’s useful if the CCM112 is to be used as a drum monitor on top of a drum sub, or on a table as a DJ monitor. Finally it has a flat placement side for use as a straight-ahead front fill. On the same surface it includes a pole socket mount for mounting on a tripod speaker stand or a pole above a socket-equipped sub, for use as a main PA speaker.

Prodigious Amplification

The amplifier consists of 2 channels with a total of 700W. The amplifier features extremely high dynamic power capacity, with 120 Volts peak output per channel, along with high damping of >10,000:1 Efficient, PFC power supply and class D output topology.

Exceptional dynamic resolution and detail along with precise control. Low current draw and light weight relative to the output capacity.

All the processing necessary for linear frequency response and phase coherent operation are pre-programmed into the DSP. With the comprehensive processing built in, BASSBOSS loudspeakers provide the ease of plug-and-play operation and the peace of mind that comes from knowing that the multiple limiter systems make to system virtually indestructible.

Rugged Drivers

CCM112 DriverThe CCM112 features a 12” woofer with a 2.5” voice coil and a 1” exit compression driver. The high-frequency horn is concentric within the woofer, making it a true point-source cabinet. The woofer’s power handling is 250W RMS and 500W program. Amplification is provided by a 700W, 2-channel Powersoft module with integrated DSP.

Any speaker that has the tweeter horizontally or vertically offset from the mid-frequency driver produces very different response as one moves through its coverage area from the tweeter side to the woofer side. This is due to the different distances the sound has to travel to reach the ears. Thanks to the co-axial construction of the CCM112 driver, the path length difference between lows and highs is the same in any direction, allowing extremely consistent off-axis response regardless of which direction you move away from directly on center.

The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!

Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.

Focused Tuning

BASSBOSS speakers can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and includes all necessary high-pass and low-pass filters along with equalization and phase alignment processing to ensure coherent response when deployed with BASSBOSS subwoofers.

There is no need for any additional EQ in the signal path for the speaker to provide a broad, flat frequency response. Sophisticated DSP programming ensures the speakers deliver consistent sound quality no matter the input level.

Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.

True Specifications

BASSBOSS technical specs are based on measurements of continuous performance in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.

BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear. 

Read more about BASSBOSS Designer David Lee’s specifications philosophy on ProSoundNetwork.

Specs

ACOUSTICAL

Loudspeaker DescriptionSingle 12 in. co-axial, compact bi-amplified, self-powered multi-angle wedge/utility monitor
Frequency Response (±3 dB)60 – 18,000 Hz
Maximum Sustained Output123 dB SPL, 1m, 2pi, half-space
Max SPL (Peak)*133 dB
Nominal Dispersion (H° x V°)80 x 80 (Conical)

ELECTRICAL

Amplification700 Watt 2 Channel Powersoft Class D Amplifier
ProcessingIntegrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and limiting
Electrical Connectors, AmplifierNeutrik powerCON Input (Blue) NAC3FCA
Electrical Connector, MainsStandard US 3-pin 120V electrical plug: NEMA 5-15 (Edison)
Voltage Operating Range90-250V. Auto-sensing, auto-switching, PFC universal power supply.
Current Draw, Nominal1A @ 120 Volts (typical, 1/8 max power)
Signal Input ConnectorXLR-F
Signal Output ConnectorXLR-M (pass-through only)
ControlsRotary Level Control with adjustment from Off to +12dB, Push-button Preset Select

PHYSICAL

Enclosure TypeBi-amplified, co-axial, vented, multi-angle wedge
Transducer (Low Frequency)1 x 12 in. diameter (300 mm) ceramic motor woofer with 3  in. (76 mm) copper winding voice coil.
Transducer (High Frequency)1 x 3 in. (76 mm) diaphragm compression driver on 1.4 in. throat concentrically mounted wave guide
Cabinet Construction16 mm Baltic Birch plywood. Equipped with an integrated handle and a 35 mm pole socket mount with M20 threaded insert
Dimensions (HxWxD)14.5 in. x 15 in. x 12 in.
Net Weight36 lbs
Shipping Weight39 lbs
Exterior FinishRugged, black textured, bonded high-pressure polyurethane coating
GrillBlack perforated, powder-coated steel.
Pole Sockets1 (35 mm, M20 threaded insert)
Handles1 Integrated Handle

OPTIONAL

Pole OptionsThreaded Pole for DJ112, CCM112 – 26 in. length and 48 in. lengths available
Stand35mm Pole Stand – Supports loudspeaker above subwoofer equipped with pole socket; Tripod Stand – Supports loudspeaker from ground
CoversHeavy-duty padded nylon transport cover with carrying handles
FaceplateOptional custom-cut aluminum faceplate

Our proactive philosophy causes specifications to be subject to change whenever improvements are made.

*Peak output is calculated using “industry standard” techniques. These calculation methods create theoretical specifications that are inflated over what can actually be achieved. BASSBOSS real world output specifications are provided as “Maximum Sustained Output” ratings, which reflect actual measured, continuous output levels.

Order

CCM112 Powered Floor Monitor

BASSBOSS CCM112 Powered Monitor Loudspeaker

A very compact bi-amplified, self-powered multi-angle wedge/utility monitor. The YesMon CCM112 can also be mounted on a pole stand to be used as an extremely size-conscious main speaker or DJ monitor. In a word, it’s versatile.

US$1,895

Contact us for assistance!

Financing

Financing For Consumers

Financing For Audio Pros

With our partner Community Finance, apply for consumer financing online and get an answer in minutes.

BASSBOSS offers financing through industry leader Hampton Ridge Financial.

Ideal if you are NOT running an existing audio-business. Click here to apply.

Financing for equipment purchases of $3,000+ Click here to apply.

GET BUSINESS CREDIT, WITHOUT YOUR PERSONAL CREDIT SCORE WITH FUNDBOX PAY.

  • 60 days to pay with no interest!
  • Convert to a 12 month loan or pay off in 60 days
  • Get started in minutes, no obligation
  • Apply with a business checking account, not your credit score

Pay now or pay over time with PayPal Credit. Just use PayPal Credit in PayPal checkout.

No Interest if paid in full in 6 months on purchases of $99 or more.

Accessories

A decorative space saving speaker stand that is also durable and stable. The heavy cast iron plate with a relatively small diameter requires little space.

US$158

Round Base Speaker Stand

Tired of breaking, bending, or generally destroying your speaker stands? Protect your investment with these extremely stable and well-constructed speaker stands.

US$190

Ultra Heavy Duty Ring Lock Speaker Stand

Tripod speaker stand set with bag. Featuring a patented expanding mandrel that holds speakers straight and tight so they won't tilt to one side or rattle at high levels.

US$395

Ultra Heavy Duty Ring Lock Speaker Stand Set W/Carry-bag

Unshakable and Stalwart! This high quality, height adjustable speaker pole guarantees a secure, stable and quiet connection between subwoofers and satellite systems.

US$135

Ring Lock Distance Rod

Unshakable and Stalwart! This high quality, height adjustable speaker pole guarantees a secure, stable and quiet connection between subwoofers and threaded satellite systems.

US$110

M20/Ring Lock Distance Rod

Support Poles - 4' Pocket Locking Poles for Mounting Tops to Subs. These poles elevate tops off subs for better sound and increased stability.

US$26

4 Foot Support Poles for Tops

BASSBOSS custom-designed covers protect your Tops & MicroMains and keep them looking new for years to come. Made in the USA, covered by an unconditional lifetime warranty. Keep your investment protected from gig wear and tear. Choose Top or MicroMain model below.

US$225

BASSBOSS Custom Cover for CCM112 Powered Loudspeakers

360º Photos
System Builders

Want to roll your own?

Mobile Guided System Builder for one-person use.

 

Production Builder for larger mobile systems.

 

Pre-Built Systems are ready to roll.

 

BASSBOSS Catalog

You may also like…