BB15 Single 15″ Powered Sub
Cute Package
SCARY Sound
US$2,595.00
Small, Cute
+ Loud
Petite cabinet, big booty! The BB15 brings the bass, takes up no space. The BB15 subwoofer’s compact size and excellent output-to-price ratio was designed for gigging DJs, home studio bass-heads, or venue owners with limited space.
Small,
But Huge
Big bass from an extra small, even lighter cabinet.
David Lee continues to push the envelope of design for mobile-optimized subwoofers. The BB15 subwoofer’s compact size and excellent output-to-price ratio was designed for gigging DJs, home studio bass-heads, or venue owners with limited space.
Portable
Power
For DJs and venues seeking extremely deep bass at moderately high levels in tight spaces, the BB15 is the smallest, lightest and most cost-effective solution available. Suitable for the truly bass-insatiable, whose focus is on modern music that features frequencies from 40-50Hz at up to 130dB, this extremely compact sub weighs only 70 lbs.
Design
The BB15 is a single 15-inch direct-radiating subwoofer. Featuring a long excursion, 15-inch woofer loaded into a vented enclosure that is tuned to optimize low frequency output using a very large port. The amplifier is loaded at the interior port end to utilize the air flow at high output for additional cooling. The cabinet was designed to minimize materials, cost and weight and maximize efficiency.
Power
It includes a 2400W RMS amplifier, rated for RMS output using continuous sine wave signal. This is not a peak or burst power rating. The amplifier is capable of delivering 2400W of continuous output, ensuring that the amp isn’t the limiting factor in the output of low frequencies. Providing abundant power also virtually eliminates the possibility of overheating and damage to the woofers caused by clipping.
Driver
All that electrical power is converted into acoustical power by a 15 inch neodymium motor woofer. This premium quality driver features a copper-winding voice coil. High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet.
Processing
Integrated, comprehensive DSP is included. Processing includes high-pass and low-pass filters as well as multiple protection systems and limiters to control all manners of driver overload, including thermal, excursion and clipping. The protection systems effectively prevent overheating of the voice coils and minimize long-term thermal compression while having virtually no effect on the transient response and peak output of the loudspeaker.
Tech Specs
 |
 |
 |
| Loudspeaker Description | Single 15” direct-radiating vented subwoofer |
| Frequency Response (±3 dB) | 40-105Hz |
| Maximum Sustained Output | 127 dB SPL, 1 meter, half-space (ground plane) |
| Max SPL (Peak)* | 130 dB |
| Nominal Dispersion (H° x V°) | Omnidirectional (360 x 360) |
| Amplification | 2400 Watt Continuous RMS Class D Subwoofer Amplifier |
| Processing | Integrated Comprehensive DSP including High Pass, Low Pass, Phase Alignment, EQ and Limiting |
| Enclosure Type | CNC machined 15mm multi-ply Birch laminate with extensive bracing and dado joinery. |
| Transducer | 1 x 15 in. diameter (380mm) Neodymium motor woofer with 4 in. (100mm) voice coil, waterproof cone |
| Cabinet Construction | 18 mm Baltic Birch plywood. Equipped with 2 integrated handles, 1 pole socket, and 4 rubber feet |
| Dimensions (HxWxD) | 20.5 in (521mm) x17 in (430mm) x 24 in (610mm) (21.25 in. high with feet) |
| Net Weight | 70 lbs |
| Shipping Weight | 83 lbs |
Loudspeaker, manual, and power cable included.
True Specifications
BASSBOSS technical specs are based on measurements of continuous performance in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.
BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear.
Our proactive philosophy causes specifications to be subject to change whenever improvements are made.
*Peak output is calculated using “industry standard” techniques. These calculation methods create theoretical specifications that are inflated over what can actually be achieved. BASSBOSS real world output specifications are provided as “Maximum Sustained Output” ratings, which reflect actual measured, continuous output levels.
Deep Dive
Hand-Built Cabinets
The BB15 is a single 15″ powered subwoofer designed to minimize materials cost and weight and maximize efficiency and output. The BB15 is an efficient, universal application, cost-effective single 15″ subwoofer. It features a 15″ driver with a 4″ voice coil and a 2400W amplifier in a Baltic Birch enclosure.
BASSBOSS cabinets are hand-assembled in the USA. Constructed from 15mm multi-ply birch laminate, using dado joints, screws and advanced composite adhesives. Stainless steel bolts are used to secure the driver, amplifier and pole sockets.
Created to stand up to intense usage. The cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powder-coated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection from damage.
Prodigious Amplification
A 2400W RMS amplifier with integrated, comprehensive DSP is included. The amplifier is rated for RMS output using continuous sine wave signal.
This is not a Peak or Burst power rating. BASSBOSS uses only continuous RMS power ratings because you’re not going to be using your sub in millisecond bursts. For subwoofer applications, Peak and Burst power ratings are largely irrelevant.
The amplifier is capable of delivering 2400W of continuous output. This ensures the amp isn’t the limiting factor in the output of low frequencies. Providing abundant power prevents overheating issues and virtually eliminates the damage that clipping a too-small amp can cause.
Rugged Drivers
All that electrical power is converted into acoustical energy by an 15 inch neodymium motor woofer. This premium-quality driver features a 100 mm (4 in) copper voice coil.
The woofer cones are waterproofed. BASSBOSS woofers can survive light rain, spilled drinks and dusty environments that may leave the drivers needing a thorough cleaning. Keep the amplifiers dry and party on!
High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet. Split-wound coils produce a more linear force through the range of movement of the cone, which results in lower distortion and improved linearity at high output.
The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!
Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.
Focused Tuning
BASSBOSS subs can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and yet minimal manipulation is applied to the signal. The processing includes only a high pass filter and a low-pass filter. There is no need for any EQ in the signal for the speaker to provide a broad, flat frequency response. A sophisticated limiter system protects the woofer from thermal and over-excursion damage.
Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.
Photos
Videos
Financing
Finance a dream system.
Easy monthly installments to get you booming NOW.
PRO AUDIO FINANCING
BASSBOSS offers financing for audio professionals with a business license through industry leader Hampton Ridge Financial.
• Financing for equipment purchases of $500+
• Any business/organization can qualify, including Start-ups
• Positive credit history with a 600+ credit score can qualify
