AT312 Powered Top
Crystal Clear Sound
Designed for discerning audiences
- Outstanding Sound Quality
- Compact, High-Output 3-Way
- Lightweight, Low-Profile
The AT312 Attuned Top is a co-axial point-source cabinet for medium to short distance coverage where high output, a small footprint and very high fidelity are required. Extremely compact, simple to use, easy to set up, and attractive, it offers superbly uncolored sound and natural musical character.
AT312 Powered Top
WHY CHOOSE AN AT312 ATTUNED TOP?
The AT312 Attuned Top provides studio-reference sound quality at high levels from a compact and lightweight loudspeaker. It is intended for use with subwoofers to complete a 4-way active full-range system for short to medium distance coverage.
The advantages offered by AT312 Tops are their coherence, accuracy, dynamic resolution and robust reliability. Premium performance that rivals expensive European imports but with USA made quality and reliability and at a fraction of their prices. These tops are designed to integrate with the BASSBOSS subwoofers to create accurate, dynamic and coherent systems that work together to ensure the best possible results from top to bottom.
No need to hold back!
BASSBOSS Tops and MicroMains are optimized and protected for safe, high-power operation.
All BASSBOSS loudspeakers are complete systems. Optimized cabinet design, premium quality drivers, power-matched amplification and comprehensive processing ensure that no matter the demand, they keep their cool, keep their character and keep on working.
So don't doubt - turn it up! Great sound feels good.
By far the most responsive and cleanest sounding system I have ever used.
If I was using another product, I would have to have double the amount of speakers and power and probably then wouldn’t even come close to what BASSBOSS delivers.”
~ Gregg Ware, One2One Bar, Austin, TX
Whether flown vertically or horizontally, or stacked on top of subwoofers, the AT312 offers consistent, even coverage over a broad 80-degree conical pattern. The thin profile of the cabinet allows it to be flown unobtrusively, whether under low ceilings or adjacent to walls, offering minimal interference with sight lines. The cabinet features 6 handles and 4 fly points.
Transportation and set-up of the SSP218/AT312 combination is easy because the subwoofers serve as a rolling carrier for the tops. In most venues it’s possible for one person to roll the system into place, lock the casters, tilt up the tops, plug in the power and signal and have an extremely substantial system ready to play in a few short minutes.
The 48” tall box elevates the mid and high frequency radiators to a minimum of 7’6” on center when stacked on BASSBOSS subwoofer systems. The cabinets also include an interlock socket to secure them in place on top of BASSBOSS subwoofers.
BASSBOSS cabinets are CNC machined and hand-built in the USA. Constructed from 18mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives.
Created to stand up to intense use. The cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powdercoated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection from damage in transit.
The amplifier consists of 4 channels with a total of 3,000W. The amplifier features extremely high dynamic power capacity, with 150 Volts peak output per channel, along with high damping of >10000:1 Each driver is connected to a dedicated amp channel to ensure the most accurate performance possible.
Efficient, PFC power supply and class D output topology offers exceptional dynamic resolution and detail along with precise control. It features low current draw and light weight, relative to the high-output capacity.
All the processing necessary for linear frequency response and phase coherent operation are pre-programmed into the DSP. With the comprehensive processing built in, BASSBOSS loudspeakers provide the ease of plug-and-play operation and the peace of mind that comes from knowing that the multiple limiter systems make to system virtually indestructible.
The highest quality drivers are used in the AT312 for extreme clarity and studio-reference sound quality at high levels. The AT312 low-frequency section features a pair of 3″ voice coil, 12″ woofers in a vented enclosure. The midrange section features a 3″ voice coil, 12″ cone mid driver in a sealed enclosure. The high-frequency section features a 3″ voice coil, 1.4″ exit compression driver coaxially loaded and firing through the center of the 12″ midrange.
All the drivers feature Neodymium motor structures for the highest efficiency to weight ratio. All the drivers also have 3″ voice coils. The woofer and midrange coils are copper whereas the compression driver voice coil is aluminum. High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet.
The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!
Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.
BASSBOSS speakers can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and includes all necessary high-pass and low-pass filters along with equalization and phase alignment processing to ensure coherent response when deployed with BASSBOSS subwoofers.
There is no need for any additional EQ in the signal path for the speaker to provide a broad, flat frequency response. Sophisticated DSP programming ensures the speakers deliver consistent sound quality no matter the input level.
Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.
BASSBOSS technical specs are based upon measurements of continuous performance capabilities in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.
BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear.
Read more about BASSBOSS Designer David Lee’s specifications philosophy on ProSoundNetwork.
The AT312s are amazing
Just wanted to let you know that we received the speakers this past Friday and everyone is thrilled. The AT312s are amazing. We did an A/B comparison test outside against 6 QSC KLA 12" line array cabs and the 312's blew them away.
AT312 Powered Top
|Loudspeaker Description||Point-source mid-high cabinet with 80 degree conical coverage for horizontal or vertical applications|
|Frequency Response (±3 dB)||80 – 18,000 Hz|
|Sensitivity||LF: 101dB; MF: 99dB; HF:105dB|
|Maximum Sustained Output||128 dB|
|Nominal Dispersion (H° x V°)||80 x 80 (Conical)|
|Amplification||3000 Watt 4 Channel Powersoft Class D Amplifier|
|Output Power Rating, Channel 1||750W @ 4 Ohm|
|Output Power Rating, Channel 2||750W @ 4 Ohm|
|Output Power Rating, Channel 3||750W @ 4 Ohm|
|Output Power Rating, Channel 4||500W @ 8 Ohm|
|Processing||Integrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and limiting; Dual 24 bit 48kHz, 116 dB(A) signal to noise ratio with 4 presets|
|Electrical Connectors, Amplifier||Neutrik powerCON Input (Blue) NAC3FCA, Neutrik powerCON Through (Grey) NAC3FCA|
|Electrical Connector, Mains||Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison)|
|Voltage Operating Range||90-250V. Auto-sensing, auto-switching, PFC universal power supply.|
|Current Draw, Nominal||360 W, 3A @ 120 volts (typical, 1/8 max power)|
|Signal Input Connector||XLR-F|
|Signal Output Connector||XLR-M (pass-through only)|
|Controls||Gain, Preset Select with 4 Presets|
|Enclosure Type||3-way mid-high. Direct radiating, vented enclosure LF section, acoustic suspension MF section with co-axially mounted, horn-loaded HF section|
|Transducer (Low Frequency)||2 x 12 in. diameter (300 mm) neodymium motor woofer with 3 in. (76 mm) voice coil, waterproof cone|
|Transducer (Mid Frequency)||12 in. diameter (300 mm) neodymium motor midrange driver with co-axial HF exit|
|Transducer (High Frequency)||1 x 1.4 in. exit 3 in. (76 mm) voice coil compression driver mounted to 80 degree conical wave guide|
|Cabinet Construction||18mm Baltic Birch plywood, dado joinery, integrated handles, 20 degree side angle trapezoid|
|Dimensions (HxWxD)||48 in. x 15 in. (f) x 14 in.|
|Net Weight||90 lbs|
|Shipping Weight||110 lbs|
|Exterior Finish||Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating|
|Grill||Perforated, powder-coated steel|
|Pole Sockets||1 (35 mm)|
|Handles||6 Integrated Handles|
|Suspension System||4 x 3/8 in.-16tpi threaded flypoints|
|Flying Hardware||Shoulder Eye Bolts. For use when flying cabinets vertically, Side-pull Anchors. For use when flying cabinets horizontally|
|Pole Options||Unthreaded Pole for DV8, SV8, AT212, AT312 – 26 in. length and 48 in. lengths available|
|Stand||35mm Pole Stand – Supports loudspeaker above subwoofer equipped with pole socket; Tripod Stand – Supports loudspeaker from ground|
|Covers||Heavy-duty padded nylon transport covers for 1 or 2 cabinets|
Custom System Builders +
Specialized tools – choose your best options:
Mobile Guided System Builder for one-person use.
Production Builder for larger mobile systems.
Pre-Built Systems are ready to roll.
Quote + Compare the entire BASSBOSS Catalog.
Contact us for more info and to order products.